Cymex Bed Bug Spray - Kills on Contact (Discontinued)
Starting at $16.95
Product Information
Cymex Natural - Green Solution
Cymex is a natural, ready-to-use, low odor liquid borate spray. Because of the low toxicity of borates, Cymex is a green pest management solution that effectively kills bed bugs, fleas, dust mites and carpet beetles on contact. It is low in toxicity to people and pets and has no known resistance.
Cymex and Bed Bugs-Fast Knockdown
Cymex kills bed bugs on contact but has no residual effect against bed bugs. When treating for bed bugs, we recommend additional residual insecticides such as those found in Walt's Bed Bug Kit.
As a contact spray, use Cymex where bed bugs have been seen or are likely to be hiding, such as around baseboards, headboards, bed frames, wall hangings, box springs, window frames, floor boards, mattresses, box springs, rugs, floor coverings, and rugs. Pay particular attention to folds, seams, and tufts in mattresses and sofas because bed bugs are frequently found there. Apply at a rate of 3-5 oz of Cymex per square foot of treatment area.
Cymex and Fleas
Not only does Cymex kill Bed Bugs, but it also kills fleas within 48-72 hours. Although it will kill on contact, it is best used with a residual insecticide and insect growth regulator for complete long term flea elimination. After vacuuming furniture, carpets, uphostery, rugs and pet bedding apply Cymex. Allow Cymex to dry before pets and people come back inside. One gallon will cover about 1000 square feet of floor surface.
Cymex -Other Insects
Cymex also kills Carpet Beetles, Dust Mites and Houshold Fungus.
Use 1 gallon per 750- 1250 square feet on floor surface.
Top Features
- Kills bed bugs on contact
- Kills fleas within 48-72 hours
- No known resistance
- Non foaming, no odor
- Green product
Ues and benefits of Cymez
Product Label | Product Label |
---|---|
SDS | MSDS |
Target Pest | Bed Bugs, Fleas, Dust Mites, Carpet Beetles and Household Fungus |
Active Ingredient (s) | Disodium Octaborate Tetrahydrate |
For Use : | Apartments, Boats, Factories, Food Processing Plants, Garages, Homes, Hospitals, Hotels, Kennels, Motels, Offices, Restaurants, Schools, Supermarkets, Trains, Trucks, Veterinary Areas, Warehouses and Zoo |
Yield | Ready To Use |
Mixture|Application | Ready To Use Liquid |
Application | Fleas: Thoroughly vacuum all furniture, upholstery, carpeting, rugs and pet bedding before application. Seal and discard vacuum bag and collected debris. Remove people and pets during product application and allow treatment to completely dry before reintroducing people or pets into treated areas. Best results are obtained when combined with a simultaneous treatment of pets using a product approved for use on pets. Although CYMEX will kill adult fleas within 48 to 72 hours, better knock-down of adult fleas may be obtained by simultaneous use of another approved insecticide. Apply to carpets, area rugs, draperies, upholstery and floor cracks. Apply using a fine, uniform spray to carpets and area rugs at the rate of 1 gallon of solution per 750 to 1,250 square feet of surface, depending upon density and thickness. Treat to dampness but do not saturate. Entire rug and carpeting areas may be treated. Pay particular attention to application of pet bedding and resting areas. Apply in cracks and crevices along baseboards and around floor coverings as well as under furniture and furniture cushions. Cement and concrete floors may also be treated using a rate of 1 gallon of solution per 1,250 square feet of surface area. Note: Freshly treated concrete floors may be slippery. Carpet Beetles, Dust Mites and Household Fungus: Thoroughly vacuum before treatment and seal and discard bag with collected debris. Apply as a fine, uniform spray to affected areas of carpets, rugs or upholstery at the rate of 1 gallon of solution per 750 to 1,250 square feet of area, depending upon density and thickness. Treat to dampness but do not saturate. Entire areas of rugs and carpeting may be treated. To Kill Bed Bugs: Apply at a rate of 3 – 5 oz per square foot of treatment area. Apply as a contact treatment onto active bedbug infestations in cracks and crevices on and around baseboards, floorboards, bed frames, headboards, furniture, window frames, door frames, walls, wall hangings and millwork. Apply as a topical spray application to mattresses, box springs, carpets, walls, furniture, rugs and other floor coverings. Treat folds, seams and tufts in mattresses, sofas and other furniture where bedbugs harbor. Do not apply as a surface spray to wood floors, linoleum or ceramic tiles due to the possible creation of a slippery surface or light residue. Do not walk on, lay or sit on treated surfaces until dry. Always test fabrics for color fastness before application by treating in an inconspicuous area first. Cleanup: Use soap and water to clean up tools |
Retreatment | As Needed |
Shipping Restrictions | N/A |