Bedbugs, fleas, mosquitoes, roaches, flies , stinging insects
See Product Label for a complete list.
|For Use :
Inside and Outside
In food and non-food areas such as, but not limited to: homes, schools, warehoused, office buildings,k apartment buildings, theaters, hotels, industrial buildings, motels, kennels, livestock, food processing planmts, food servce establishments, restaurants, supermarkets and grocery stores, transportation equipment, truck trailers, Railroad cars, and food manufacturing establishments. Also for use on backyards, lawns, trees, ornamental landscaping, recreational areas, parks and athletic fields.
Fenvastar EcoCap should be mixed with water and applied with hand pressurized or power operated sprayers. Shake container of Fenvastar EcoCap before diluting. Clean spray equipment before use. For dilution, add approximately half the required water to spray tank and then add the appropriate amount of Fenvastar EcoCap. Agitate and slowly add the remaining water.
Agitate spray thoroughly before using and also occasionally during use to ensure dispersion. If spray filter screens are used, they should be 50 mesh or larger. Use 1.0 fluid ounce (30 cc.) of Fenvastar EcoCap in 1 gallon of water to make a spray mix containing 0.025% active ingredient.
Use 2.0 fluid ounces (60 cc.) per gallon of water to make a spray containing 0.05% active ingredient. Use 0.025% solution, for light infestations or as a maintenance control rate. Use 0.05% for heavy infestations or as an initial clean out rate. Apply two-second bursts of spray per square foot of area being treated. Avoid excessive application. Dampen surfaces but not to the point of saturation or run-off.