Cy-Kick CS Concentrated Insecticide

Active Ingredient: Cyfluthrin 6.0% 
May not be shipped to AK, CT or NY

Cy-Kick CS liquid concentrate insecticide provides 60-90 days residual, controlling insects indoors and outdoors.

Cy-Kick has a broad spectrum label including spiders, ants, boxelder bugs,  mosquitoes, bees, cockroaches, crickets, fleas, flies, bed bugs, silverfish, ticks, wasps, wood infesting borers and more. See above attached product label for a complete list of insects.

Cy-Kick CS is known for its Cool Cap microencapsulation technology which increases the number of microcapsules while decreasing their size, providing superior surface coverage. Cy-Kick CS leaves no visual residue and provides long-lasting coverage from the active ingredient, cyfluthrin.

MIXING INSTRUCTIONS

Thoroughly clean spray equipment before using Cy-Kick CS. Shake concentrate well before diluting. When diluting, first add approximately one-half of the water to the spray tank and then add the proper amount of Cy-Kick CS. When emptying the bottles, triple rinse with water, shake well, and add the rinsate to the spray tank. Add the rest of the water and agitate the sprayer thoroughly. Agitate sprayer occasionally during use to ensure even mixture. Shake or re-agitate sprayer if spraying is interrupted or if dilution is left in sprayer overnight. If spray screens are used, they should be 50 mesh or larger.

VOID / CRACK & CREVICE® APPLICATION

To treat insects harbored in voids and in cracks and crevices, apply with equipment designed for void applications. Follow the manufacturer's recommendations for proper equipment set up and operating pressures. Place the tip of the applicator at or into the crack or crevice to be treated. Apply product in short bursts while keeping tip in position. Allow the air stream to push insecticide deep into voids. Application should be made in such a manner to limit dripping and run-off on structural surfaces and plants.

Indoor Treatments

Dilute Cy-Kick CS to 0.05% or 0.10% with water using the spray dilution chart. Cy-Kick CS should be used as a Crack & Crevice residual product where insects may be hiding, living and breeding, and/or for selected spot application. When using in food/feed areas of food/feed handling establishments, restaurants, or other areas where food/feed is commercially prepared or processed, refer to the section entitled "Food/Feed Areas of Food Handling Establishments" for use directions. Non-food/feed areas are areas such as garbage rooms, restrooms, floor drains (to sewers), entries and vestibules, offices, locker rooms, machine rooms, boiler rooms, garages, mop closets, and storage (after canning or bottling).

CENTIPEDES, COCKROACHES, CRICKETS, DERMESTIDS, EARWIGS, FIREBRATS, MILLIPEDES, PSOCIDS, SILVERFISH, SOWBUGS, SPIDERS: Make spot treatment and/or Crack & Crevice injections into hiding places such as cracks and crevices, void areas, moist areas, openings around pipes and sinks, and under refrigerators. Repeat as necessary but not more than twice per week. Treatments must be at least 3 days apart.

FLIES: Make spot applications of Cy-Kick CS on surfaces where flies rest in the dark at night or frequent during the day, such as window frames, screens, trash cans, ceilings, and upper wall surfaces.

CARPET BEETLES (DERMESTIDS): Treat along edges of carpet, under carpet edge, furniture, throw rugs and as a crack & crevice application in closets, and other shelving where infested items are stored. Do not treat clothing with this product. Repeat application as necessary but not more than twice per week. Treatments must be at least 3 days apart.

BED BUGS: Allow treated articles to dry thoroughly before use. Take bed apart. Treat joints and channels if hollow, such as square or round tubing. See that the interior framework is treated. Treat mattresses, especially tufts, folds ,and edges. Cover mattresses with outer sheets before use. Do not apply to other bedding articles. Also treat other areas where bed bugs may be harboring.

TICKS: Apply as a spot and/or Crack & Crevice treatment in infested and egg laying areas such as pet resting quarters, nearby cracks and crevices, behind baseboards, door, and window frames. Replace pet's old bedding with clean fresh bedding after treatment. Do not treat pets with this product. Repeat application as necessary but not more than twice per week. Treatments must be at least 3 days apart.

ANTS: Inject cracks, crevices, and voids where ants may be traveling and/or harboring, including but not limited to, around doors, window frames, and other structural cracks, crevices, and voids. Spot treatment of trails and feeding areas may also be made.

STORED PRODUCT PESTS (EXPOSED ADULT AND IMMATURE STAGES): Before storing products, treat warehouses, production facilities, storage areas, rail cars, truck beds and other areas where products are stored with Cy-Kick CS. Apply as a spot and/or Crack & Crevice treatment to cracks, crevices and surfaces where pests have been seen or may have harborage. Cy-Kick CS may be used to treat grain storage facilities and other listed areas for stored product pest control. Cleaning areas prior to use of this product will increase levels of control. Any foodstuffs infested with pests should be removed and destroyed.

FOAM APPLICATION USE DIRECTIONS: Cy-Kick CS can be converted to a foam and the foam used to treat structural voids to control insect and arthropod pests in walls, under slabs, or in other void areas. Apply as a dry foam (approximately 25:1). Fill void with foam so that all surfaces are contacted. Mix end-use dilution of Cy-Kick CS with manufacturer's recommended volume of foaming agent. Use the recommended rate suspension converted to a foam to achieve the desired foam expansion ratios. Verify before treatment that the foaming agent is compatible with Cy-Kick CS.

OUTDOOR TREATMENTS:

Cy-Kick CS can be used as a residual treatment on outdoor surfaces and/or as a crack, crevice, and void treatment of buildings, porches, window frames, eaves, patios, garages, garbage dumps, and other areas where pests congregate or enter premises. Repeat treatment as necessary to maintain effectiveness but not more than twice per week. Treatments must be at least 3 days apart. Use the 0.05% or 0.10% rate. Cy-Kick CS can be used as a residual treatment to control pests in outdoor void areas such as meter boxes and manholes. Repeat treatment as necessary but not more than twice per week. Treatments must be at least 3 days apart. Use the 0.05% or 0.10% rate.

PERIMETER TREATMENT:

To help prevent infestations of buildings, treat a band of soil 6 to 10 feet wide around and adjacent to the building. Also treat the building foundation to a height of 2 to 3 feet where pests are active and may find entrance. Treat other insect entry points such as doors, windows, under siding, and eaves of structure. Cy-Kick CS may be applied in compressed air, backpack, or power spray equipment. An application rate of 0.5 to 1.0 fluid ounce of Cy-Kick CS per 1,000 sq.ft. is desirable. Apply in sufficient water to adequately cover the area being treated. Application should be made in such a manner to limit dripping and run-off on structural surfaces and plants. Alternate directions are to use 4 to 8 fl. oz. of product per 50 gallons of water.

FLIES: Treat outside surfaces of screens, doors, window frames, or wherever flies enter. Also treat surfaces on porches, in garages, and other places where insects light or congregate. Repeat as necessary. Treat normal fly resting areas such as ceilings, upper corners of the area, around windows and doors, and other surfaces. Treat inside and outside surfaces of dumpsters and other trash holding containers. Treat trash storage areas. Treat so as to lightly moisten the target surface. For best results, begin treatments at the start of the fly season and repeat during periods of heavy fly activity. Treat no more than twice per week and at least 3 days apart.

MOSQUITO CONTROL OUTDOORS:

To control adult mosquitoes, use handheld, back-pack, or truck-mounted sprayers only. Not for use with truck-mounted cold aerosol ULV sprayers, hand-held cold aerosol ULV sprayers, or thermal fogging devices. Do not apply by aircraft. Do not apply through any kind of irrigation and/or lawn sprinkler systems. Use up to 150 gallons of diluted spray per acre. Treat shrubbery, vegetation and other areas where mosquitoes may rest. Shrubbery and vegetation around stagnant pools, marshy areas, ponds, and shorelines may be treated if applied as a wet spray. Direct application of this product to any body of water is prohibited.