Fogmaster Micro-Jet ULV 7401
The Fogmaster Micro-Jet ULV 7401 permits an ultra-low volume application with a particle size (under 7 micron VMD). The ultra-low volume application allows the use of more concentrated fogging solutions and speeds up treatment time.Using a standard 1 oz/MCft ULV rate, the Micro-Jet covers 2 -4,000 cubic feet per minute.
If you need large particle size droplets and high output, it can deliver up to 10 oz/minute in a mist of large droplets (30 microns).The larger droplet size is useful in dust abatement, humidification, and sanitizing work.
This low volume fogger has a 9-turn precision valve control to adjust droplet size and liquid output. Increase the flow rate for more massive fogs and mists. After establishing a valve setting, the vernier calibration returns it to the same setting. It also has a lock ring to snap into place to prevent accidental changes.
The versatile Micro-Jet Fogger handles both water or oil-based chemicals. When changing liquids, it is easy to calibrate the chemical flow rate of differences in liquid viscosity, density, or surface tension.
Widely used in restaurants, schools, hotels, commercial locations, barns, homes, and other locations, the Micro-Jet Fogger is lightweight and portable.
Fogmaster honors a five-year-limited warranty.
||740110: 1 Hp, 120VAC 50/60Hz, 7 amp
740120: 1 Hp, 220-240V 50/60 Hz, 3.5 amp
||High-shear, counter-rotating vortex design
||7 - 30 micron VMD, adjustable
(ultra fine, dry fog to heavy, wet fog)
|Liquid Flow Rate
||0-8 oz/min [0-250 ml/min]
Nine turn vernier valve
Valve lock feature
||Water- or oil-based solutions
||1 gallon [4 liters]
|Materials of Construction
||Construction Power head housing and tank - aluminum
Tubing - fuel and oil resistant vinyl
Fittings - brass
Control valve - glass filled nylon, stainless stem
Seals & O-rings - Viton®
Nozzle - Celcon® acetyl copolymer
||HDPE nozzle for strong oxidizers
Stainless steel fittings
Stainless steel tank
HP (high pressure) motor: 740112, 740122 [8A; 4A]
Tank with float valve (brass; 1/4" compression fitting)
||UL, CSA, CE, PSE
||H x L x Dia:
15.4 x 10.4 x 8.6 in
[39 x 26 x 22 cm]
||12 pounds [6 kg]